The ET-3 is designed to expand your triggering capabilities, and comes with one 12V power adapter and four 3.5mm trigger output cables. Up to three devices (amplifiers, preamplifiers, etc.), can be triggered on and off using the ET-3.

In the 'On' position, all the triggers are constantly on, as long as the ET-3 itself is receiving power. This is particularly useful if your receiver/preamp/processor does not have a trigger output, but does have a switched outlet. If this is the case, plug the supplied ET-3 adapter into the switched outlet. The ET-3 will switch on/off along with the receiver/processor/preamp.

In the 'Remote' position, the ET-3 now looks for a signal on the trigger input. When a signal is detected, the ET-3 switches on all trigger outputs. This is the mode you should use if your receiver/processor/preamp has a trigger output.

Trigger outputs to go to amplifiers or other equipment. Each output is 12V, at 150 mA, with a 3.5mm (1/8 inch) mono jack (tip positive)

The ET-3 is also daisy-chainable, giving you the power to trigger even more devices with multiple ET-3's.

* The ET-3 power supply is 100-240V, making the ET-3 suitable for worldwide use.*