The XPA-2 also boasts a bridgeable mode, turning it into a 1,000 watt (8 ohms) monoblock amp.

This amplifier is the perfect companion for either the XPA-5 or XPA-3, creating jaw-dropping 7.1 or 5.1 systems. XPA-5 details/photos  XPA-3 details/photos

• Number of channels: 2
• Amplifier Class: Short signal path A/B
• Output design: Triple Darlington with Toshiba output stages
• Differential Drive: Dual Differential input
• Types of inputs: Both Balanced (XLR) and Un-balanced (RCA)
• Type of outputs: Audiophile quality 5 way binding post
• Display type: Digital VU meters
• Metering: 14) Blue LEDS and 1) red per channel
• Power output: 250 watts RMS/ channel into 8 ohms, 500 watts RMS/ channel into 4 ohms and 1,000 watts RMS bridged.
• THD+N at rated power output: 0.007%
• S/N ratio: >100db
• Frequency response: 10 to 120Khz (-3db) and 20 to 20 (with less than .15db deviation)
• Gain structure: 32db
• Transformer size: 1600va mounted in a super structure
• Secondary capacitance: 120,000uF
• Weight: Approximately 75 pounds
• Retail price: $799.00
• 17” W x 7.75” H x 19” D

Additional features: Glass epoxy pc boards, 1% resisters, Metal film capacitors, soft start circuitry (does not have a current spike on start up), dual stage rectifiers and secondary capacitance.

Compartmentalized design for greater isolation from noise. The transformer, is mounted in it's own substructure. The amplfiier channels are all fully shielded, and the unit has switches for turning the metering and/or status LEDs on or off. The amplifier also features automatic voltage selection.

The ultimate high power 2 channel reference amp. Every aspect of the amp was designed for superior performance.

VIDEO: See the custom LED meters of the XPA-2 in action!

DOWNLOAD COMPLETE XPA-2 MANUAL
Note: this is a large PDF file, and will take a few moments to load. It will open in a new window when ready.