Combine an XPA-3 with an XPA-2 to create the ultimate 5.1 system.  
XPA2 details/photos

• Number of channels: 3
• Amplifier Class: Short signal path A/B
• Output design: Triple Darlington with On semi-conductor output stages
• Differential Drive: Dual Differential input
• Types of inputs: Both Balanced (XLR) and Un-balanced (RCA)
• Type of outputs: Audiophile quality 5 way binding post
• Display type: Digital status indicators
  
  
• 200 watts RMS/channel into 8 ohms, all channels driven
  • 3 channels - 8 ohm = 200 watts per channel
    
  • 2 channels - 8 ohm = 250 watts per channel
    
  • 1 channels - 8 ohm = 300 watts per channel
    
    
• 4 ohm rating:
  • 3 channels - 4 ohm = 300 watts per channel
  • 2 channels - 4 ohm = 400 watts per channel
  • 3 channels - 4 ohm = 500 watts per channel
  
  
• THD+N at rated power output: 0.007%
• S/N ratio: >100db
• Frequency response: 10 to 120Khz (-3db) and 20 to 20 (with less than .15db deviation)
• Gain structure: 32db
• Transformer size: 1600VA Toroid
• Secondary capacitance: 60,000uF
• Weight: Approximately 70 pounds
• 17” W x 7.75” H x 19” D

Additional notes: Glass epoxy pc boards, 1% resistors, metal film capacitors, soft start circuitry (does not have a current spike on start up).

Modular channel design for greater channel separation, auto rail detection relays for automatic voltage selection. The unit also has switches for turning the metering and/or the status LED's on or off.

This is a no compromise design. Every aspect of the amp was designed for superior performance and reliability.

DOWNLOAD COMPLETE XPA-3 MANUAL
Note: this is a large PDF file, and will take a few moments to load. It will open in a new window when ready.