Firmware 1.9 is now available!

Firmware 1.9 is now available!

LATEST RELEASE RMC-1, RMC-1L, XMC-2, XMC-1V3 (HDMI upgrade) FIRMWARE - as of 3/4/2020 - firmware v1.9 (replaces 1.8)

(STRONGLY RECOMMENDED)

This link will get you the latest version of the RMC-1 firmware as of 3/4/2020 (v1.9) :

>> Click here to download <<


The download is a DAT file.
Place it in the main folder of a USB stick formatted FAT32.

(Make sure there are no other firmware update files in the main folder!)

 

RELEASE NOTES:

Several small but important items have been fixed or improved.....

IMPROVED - Notable improvements have been made to CEC and ARC performance with different monitors.
CHANGED DEFAULT - Factory Default setting is now 9.1.6 speaker configuration (was 7.1).
CHANGED DEFAULT - Factory Default is now “Video Remains On” ("High-Power Standby"; was "Low-Power Standby / full reboot).

CHANGED BEHAVIOR - When Dim=0 Info display now pops up at 40% (was 10%).


FIXED - Flickering image with LG-C7, LG-C8, LG-C9 in combination with Apple TV DV @60hz.
FIXED - Loss of audio after FF, Rew, Pause on DVR, cable, and Sat boxes.
FIXED - No audio from speakers on some TVs with “Video Remains On”.
FIXED - “Audio to TV” no audio from pre-outs. (TV stealing audio).
FIXED - No Menu without video source (no Menu over "black screen").
FIXED - No Audio from audio-only source after “Low Power” boot.
FIXED - Internal “levels” wrong in Left Sub (when using Left / Right Subs).
FIXED - “Emotiva” banner sticks at boot up until action is made when Dim=0.
FIXED - Interaction of Dolby Up-mixer to fix 250 and 500hz peaking.



UPDATE NOTES:

1)
The download will arrive in the form of a DAT file, which is the actual firmware update file.
There is no need to extract this file.
To install this update simply place the update file in the main folder of a USB stick and do a SETUP | ADVANCED | FIRMWARE UPDATE.
You should also ensure that this is the ONLY FILE in the main folder of your USB stick.
(If you wish to archive other versions of the RMC-1 firmware on your USB stick - BE SURE TO PUT THEM IN A SUB FOLDER.)

2)
AFTER THIS FIRMWARE UPDATE IS PERFORMED WE RECOMMEND THAT YOU RESET ALL THE HDMI DEVICES YOU HAVE CONNECTED TO THE RMC-1.
TO DO THIS YOU MUST PHYSICALLY UNPLUG THE AC POWER ON THE RMC-1, YOUR TV, AND ANY OTHER HDMI DEVICES YOU HAVE CONNECTED TO YOUR RMC-1.
Everything must be unplugged AT THE SAME TIME for at least ten seconds.

This will ensure that all of your devices go through a full reboot.
(We DO NOT REQUIRE this but, if you have ANY problems, then you should do it.)

SOME RMC-1 USAGE NOTES:

We have become aware that many of the problems people have been experiencing are due to compatibility issues between modern HDMI 2.0 devices and older HDMI 1.4b devices.
(Even though HDMI 2.0 is claimed to be backwards compatible with older devices - some people experience issues when connecting certain older devices to HDMI 2.0 inputs on the RMC-1 and other devices.)
YOU CAN CONFIGURE EACH INPUT ON THE RMC-1 FOR MAXIMUM COMPATIBILITY WITH EITHER HDMI 2.0 OR HDMI 1.4 DEVICES.