Extensor de señal HDMI 4K 18 Gbps HDBaseT

If you’ve ever had to connect an HDMI source, like your home theater preamp/processor, to a monitor or projector all the way across a large room, you may have run into a few problems. Long HDMI cables can be expensive and unwieldy, and even the best quality regular HDMI cables may become unreliable if they’re too long, especially with the latest 4k video formats. There are a few specialty cables available that work over longer distances, but they are extremely expensive, and may have compatibility issues with your equipment.  

The HDMI HDBaseT Signal Extender provides a practical and cost effective solution to this problem. The HDMI HDBaseT Signal Extender replaces your old HDMI cable with a pair of small modules, connected together by a high-speed network data cable. The HDMI HDBaseT Signal Extender enables you to transmit HDMI signals over much longer distances than standard HDMI cables, with perfect video and audio quality; and, even better, the Cat6 UTP network cable you use to connect the two modules is both readily available and very inexpensive. As an added bonus, the HDMI HDBaseT Signal Extender also lets you send the electrical signals for your IR and RS-232 remote controls over the same wire.

Full Support for HDMI 2.0b Video, Audio, and Remote Control Signals

The HDMI HDBaseT Signal Extender consists of two small devices, a transmitter and a receiver, which are located near your source and sink devices, and connected together using standard unshielded twisted pair network cable. Any standard HDMI 2.0b compatible video signal input into the transmitter is output from the receiver with virtually no loss in quality. In addition, IR remote control signals are passed in both directions, allowing an IR remote control used at either location to control devices at the other end, and a separate connection is provided for passing standard RS-232 control information in both directions as well.  

Send 4k UHD Video Over 120 Feet; Send HD Video Over 210 Feet

The HDMI HDBaseT Signal Extender has a video bandwidth of 18 Gbps, is fully HDMI 2.0b and HDCP 2.2 compatible, and supports all current standard 4k UHD video signals. The HDMI HDBaseT Signal Extender can transmit 4k UHD video up to 40 meters (over 120 feet), and standard HD video up to 70 meters (over 210 feet), using easily available low-cost “Cat6 UTP network.

Compatible With All Current Video Standards

• HDMI 2.0b and HDCP 2.2 compliant.
• Full 18 Gbps bandwidth supports all current video formats, including 4k UHD with HDR (4k UHD@50/60 Hz (YUV 4:4:4) and HD.
• Supports Dolby Vision
• Supports Dolby Atmos
• Supports DTS:X
• Supports low cost Cat6 cables.
• Supports CEC bypass.
• Full bi-directional transfer of IR electrical remote control signals.
• Full bi-directional transfer of RS-232 serial remote control signals.
• Range of up to 40 meters (120 feet) with 4k UHD video, and over 70 meters (210 feet) with HD video.
• Uses easily available low-cost “Cat6 UTP network cable”.
• Simply make the appropriate connections and you’re ready to go; there is nothing to program or configure.
• Replace several connections for video and remote control with a single cable.
• Status LEDs show connection and power status at a glance.

Bi-Directional Transfer of IR And RS-232 Remote Control Signals

• Full bi-directional transfer of IR electrical remote control signals.
• Full bi-directional transfer of RS-232 serial remote control signals.

Transfer Full Quality Video And Control Signals Efficiently Over Long Distances

• Range of up to 40 meters (120 feet) with 4k UHD video, and over 70 meters (210 feet) with HD video.
• Uses easily available low-cost “Cat6 UTP network cable”.
• Total power consumption of less than 24 watts.

Simple to Configure And Use

• Simply make the appropriate connections and you’re ready to go; there is nothing to program or configure.
• Replace several connections for video and remote control with a single cable.
• Status LEDs show connection and power status at a glance.

HDMI Video Support

• HDMI compliance: HDMI 2.0b.
• HDCP compliance: HDCP 1.4 and HDCP 2.2.
• Video bandwidth: 18 Gbps.
• Video resolutions and transmission ranges: - up to 70 meters at 1080p/60 Hz/36 bits. - up to 70 meters at 1080p/30 Hz/36 bits/3D. - up to 40 meters at 4k UHD/60 Hz/YUV4:2:0 and YUV 4:4:4. - up to 40 meters at 4k UHD/30 Hz/24 bits. - up to 40 meters at 1080p/60 Hz/36 bits/3D. - up to 40 meters at 1080p/60 Hz/48 bits. - up to 40 meters at 1080p/120 Hz/24 bits.
• Color spaces supported: RGB, YCbCr 4:4:4, YCbCr 4:2:2.
• Color depth supported: 8 bits/10 bits/12 bits per channel.
• Connection type: HDBaseT.
• Physical: Standard network cable; Cat6 UTP or better.
• Power requirement: 100 - 240 VAC 50/60 Hz (external AC power pack; included).
• Power consumption: 24 watts (max).
• Mechanical: (each enclosure) 6-1/4” x 3-5/8” x 1” (transmitter and receiver each have a separate all-metal enclosure).
• Weight: 12 ounces.
• Color: Black.

Signal Connection

• Connection type: HDBaseT.
• Physical: Standard network cable; Cat6 UTP or better.
• Power requirement: 100 - 240 VAC 50/60 Hz (external AC power pack; included).
• Power consumption: 24 watts (max).
• Mechanical: (each enclosure) 6-1/4” x 3-5/8” x 1” (transmitter and receiver each have a separate all-metal enclosure).
• Weight: 12 ounces.
• Color: Black.

Power Requirements

• Power requirement: 100 - 240 VAC 50/60 Hz (external AC power pack; included).
• Power consumption: 24 watts (max).

Mechanical

• Mechanical: (each enclosure) 6-1/4” x 3-5/8” x 1” (transmitter and receiver each have a separate all-metal enclosure).
• Weight: 12 ounces.
• Color: Black.