BasX A3+ Three-Channel Power Amplifier
The BasX A3+ is the ideal choice to power a 3.1 channel system, to ...
The BasX A3+ is the ideal choice to power a 3.1 channel system, to upgrade the front three channels of a surround sound receiver, or for anywhere where three channels of great sounding clean power are needed.
If you are ordering from Emotiva Europe, the product cost includes all taxes and free shipping. It is higher than our USA product price which does not include any taxes. USA customers pay taxes as a separate line item fee added at checkout.
Product Overview
Product Features
Specs & Downloads
The BasX A3+ is a three channel power amplifier. The BasX A3+ combines classical audiophile amplifier architecture, based on a heavy-duty linear power supply, and a carefully designed high current short signal path Class A/B output stage, with advanced microprocessor-controlled monitoring and protection circuitry, to deliver superb sound quality at a truly reasonable price.
Power Output (ALL channels driven)
140 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms
200 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms
Power Output (two channels driven)
150 watts RMS per channel; into 8 Ohms250 watts RMS per channel; into 4 Ohms
• Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.02 dB)
• Broad Band Frequency Response: 10 Hz to 80 kHz +0/-1.8 dB
• THD + noise: < 0.02% (A-weighted); ref rated power
• Signal to Noise Ratio (8 Ohm load): > 112 dB; ref rated power; (A-weighted)
• Minimum Recommended Load Impedance (per channel): 4 Ohms (equals one 4 Ohm load or two paralleled 8 Ohm loads)
• Damping Factor (8 Ohm load): > 500
• Input Sensitivity (for rated power; 8 Ohm load): 1.25
• Gain: 29 dB• Input Impedance: 27 kOhms
Input Connections
Unbalanced (RCA); one each per channel
Balanced (XLR); one each per channel
Speaker Output Connections
Audiophile grade 5-way binding posts
Trigger
• Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required
• Trigger Output: 12 VDC; can drive any load up to 120 mA
Power Requirements
- 115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected)
Protection
- The BasX A3+ is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.
Front Panel Controls and Indicators
• Standby: push button
• Status LEDs: one per channel; blue
• Standby LED: amber
Rear Panel Controls
• AC Power switch: rocker switch (switches AC main power)
• Status LEDs switch: disables front panel Status LEDs
Dimensions
• 17” wide x 4” high x 15-1/2” deep (not including connectors)
• 21-1/2” wide x 8” high x 21” deep (boxed)
Weight
25 lbs (unboxed)31 lbs (boxed)