BasX MR1L 9.2 Channel Dolby Atmos® & DTS:X™ Cinema Receiver
The BasX MR1L cinema receiver combines a high performance 13.2 chan...
The BasX MR1L cinema receiver combines a high performance 13.2 channel immersive surround sound processor, and an audiophile quality 9 channel power amplifier, in a single chassis.
If you are ordering from Emotiva Europe, the product cost includes all taxes and free shipping. It is higher than our USA product price which does not include any taxes. USA customers pay taxes as a separate line item fee added at checkout.
Need Help?
Product Overview
Product Features
ENHANCED ARC SUPPORT
The MR1L provides full support for standard ARC (Audio Return Channel) for devices that don't have eARC support. For devices that support the new eARC (Enhanced ARC) standard the MR1 will detect this and enable eARC support. Note: Only HDMI Output #1 on the MR1 supports ARC and eARC. Note: On most TV sets only one HDMI Input supports eARC, so be sure and connect the MR1 to that input. In addition to this, on many TV sets, eARC must specifically be enabled, so be sure that eARC is enabled in your TV's configuration menu.
ACTIVE HDMI OUTPUT SWITCHING
As defined in the HDMI standard, if you have two devices with different video capabilities connected to the two outputs on the MR1L, and both are on, your video source will negotiate a video format supported by both, and the MR1L will send that same video signal to both devices. So, for example, if you have a 4k TV, and a 1080p TV, and only the 4k TV is turned on, it will receive a 4k signal; however, if both TVs are turned on, then both will receive a 1080p video signal (because that is the highest resolution format that both TVs support). The same requirement is also true for some other features - like HDR. Unfortunately, many modern TVs and projectors do not report their status correctly to the processor and source device. As a result of this, for example, you may find that you don’t get 4k video on your 4k TV set unless the 1080p TV set is physically disconnected (unplugged).
The MR1L has a special feature that enables you to avoid this sort of problem. On the MR1L you have the option to temporarily disable each HDMI Output individually. So, in the example above, by disabling the HDMI Output connected to the 1080p TV set when that set isn’t in use, you can prevent it from limiting the 4k video signal being sent to your 4k set.
INCREDIBLY DETAILED SURROUND SOUND AND VIDEO PERFORMANCE
The MR1L features 6 HDMI 2.0b video inputs, all of which support 4K UHD HDR video formats including eARC.
Powerful Analog Devices SHARC DSP supports the latest Dolby Atmos, Dolby Surround, DTS, DTS:X, DTS Neural X, and other popular modes.
ADVANCED EMO-Q® AUTOMATIC ROOM CORRECTION
The MR1L includes the latest and most advanced version of our EMO-Q Automatic Room Correction System. EMO-Q® now displays a visual interface which includes graphs of both the measured and corrected room response. Channels can now also be tested, and the results adjusted, individually.
AUDIOPHILE QUALITY CLASS A/B AMPLIFIERS
The MR1L includes both audiophile quality Class A/B amplifiers, which feature advanced power supply topology for optimum efficiency, and line level analog preamp outputs. This enables the MR1L to be used with a combination of passive loudspeakers and external amplifiers,
The BasX MR1L Is a true audiophile component, designed and built by professionals to deliver the outstanding performance that both audiophiles and casual listeners can appreciate.
Specs & Downloads
Video Inputs and Outputs
- (6) HDMI 2.0b compliant HDMI video inputs (all with full support for 4k UHD video, HDCP 2.2, HDR10, HDR10+, and Dolby Vision).
- (2) HDMI 2.0b compliant HDMI video outputs (primary output supports both ARC and eARC).
Audio Inputs
- (4) stereo unbalanced analog audio inputs.
- (2) S/PDIF coaxial digital audio inputs.
- (2) Toslink (optical) digital audio inputs.
- (1) USB Audio (DAC) input.
- (1) Bluetooth audio input (internal with rear panel antenna).
Audio Outputs
- (1) set of 13.2 channel unbalanced audio main outputs.
- (1) set of 9 channel speaker outputs
- (2) balanced subwoofer outputs (in parallel with main sub outputs).
Other Inputs and Outputs
- (1) IR remote control signal input.
- (1) RS-232 serial remote-control port
- (1) Trigger output (programmable).
- (1) USB data input (reserved for firmware updates).
Surround Sound Audio Formats
- Dolby Atmos
- Dolby TrueHD
- Dolby Surround
- DTS:X
- DTS HD Master Audio
- DTS
Surround Sound Upmixers
- Dolby Surround Upmixer (DSU)
- DTS Neural:X
Sound Field and Processing Options
- Pure
- Direct
- Stereo
- Multi-Channel
- Dolby Upmix
- DTS Neural:X
Automatic Room Correction
- EmoQ Second Generation Automatic Room Correction (with graphical interface)
Manual Room Correction (EQ)
Three Separate Manual Speaker Presets - Each Of Which Offers...
11 Bands of Full Parametric EQ: Left Front and Right Front
11 Bands of Full Parametric EQ: Center Channel
7 Bands of Full Parametric EQ: Surround Channels
7 Bands of Full Parametric EQ: Top Channels
5 Bands of Full Parametric EQ: Subwoofers
Line Level Analog Outputs (Preamp Outputs)
Rated Output Voltage:
+6 dBV (2 VRMS)
Frequency Response:
20 Hz to 20 kHz +/- 0.05 dB
Total Harmonic Distortion:
< 0.0025% @ 1 kHz
< 0.05% from 20 Hz to 20 kHz
Signal to Noise Ratio:
> 100 dB @ 1 kHZ
Crosstalk: < 85 dB @ 10 kHZ
Speaker Outputs (Amplifier Section)
Power Output Per Channel; ONE channel driven:
150 watts RMS / channel @ 8 Ohms; 220 watts RMS / channel @ 4 Ohms; < 0.1% THD
Power Output Per Channel; TWO channels driven:
140 watts RMS / channel @ 8 Ohms; 200 watts RMS / channel @ 4 Ohms; < 0.1% THD
Power Output Per Channel; FIVE channels driven:
110 watts RMS / channel @ 8 Ohms; 140 watts RMS / channel @ 4 Ohms; < 0.1% THD
Power Output Per Channel; NINE channels driven:
85 watts RMS / channel @ 8 Ohms; 100 watts RMS / channel @ 4 Ohms; < 0.1% THD
Power Bandwidth (at rated power; 8 Ohm load):
20 Hz to 20 kHz (+ 0 / - 0.15 dB) or better
Broad Band Frequency Response:
5 Hz to 80 kHz (+ 0 / - 3 dB)
THD + Noise:
< 0.02% (A-weighted); at rated power; 1 kHz; 8 Ohms
Signal To Noise Ratio (8 Ohm Load):
> 105 dB or better; referenced to rated power (A-weighted)
Minimum Load Impedance:
4 Ohms (one 4 Ohm speaker or two paralleled 8 Ohm speakers)
Damping Factor:
> 400
Power Requirements
115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected)
Dimensions
17” wide x 5 3/4” high x 14” deep (without connectors)
20" wide x 10" high x 22" deep
Weight
33 lbs. (unboxed)
42 lbs. (boxed)
Complete Your Audio Solution
- Regular price
- $579.00
- Sale price
- $579.00
- Unit price
- per
- Regular price
- $2,499.00
- Sale price
- $2,499.00
- Unit price
- per
- Regular price
- $799.00
- Sale price
- $799.00
- Unit price
- per
Product Reviews
You May Also Like
- Regular price
- $1,999.00
- Sale price
- $1,999.00
- Unit price
- per
'%3e%3cg id='Final-Copy-2_2_' transform='translate(1275.000000, 200.000000)'%3e%3cpath class='st0' d='M7.4,12.8h6.8l3.1-11.6H7.4C4.2,1.2,1.6,3.8,1.6,7S4.2,12.8,7.4,12.8z'/%3e%3c/g%3e%3c/g%3e%3c/g%3e%3cg id='final---dec.11-2020'%3e%3cg id='_x30_208-our-toggle' transform='translate(-1275.000000, -200.000000)'%3e%3cg id='Final-Copy-2' transform='translate(1275.000000, 200.000000)'%3e%3cpath class='st1' d='M22.6,0H7.4c-3.9,0-7,3.1-7,7s3.1,7,7,7h15.2c3.9,0,7-3.1,7-7S26.4,0,22.6,0z M1.6,7c0-3.2,2.6-5.8,5.8-5.8 h9.9l-3.1,11.6H7.4C4.2,12.8,1.6,10.2,1.6,7z'/%3e%3cpath id='x' class='st2' d='M24.6,4c0.2,0.2,0.2,0.6,0,0.8l0,0L22.5,7l2.2,2.2c0.2,0.2,0.2,0.6,0,0.8c-0.2,0.2-0.6,0.2-0.8,0 l0,0l-2.2-2.2L19.5,10c-0.2,0.2-0.6,0.2-0.8,0c-0.2-0.2-0.2-0.6,0-0.8l0,0L20.8,7l-2.2-2.2c-0.2-0.2-0.2-0.6,0-0.8 c0.2-0.2,0.6-0.2,0.8,0l0,0l2.2,2.2L23.8,4C24,3.8,24.4,3.8,24.6,4z'/%3e%3cpath id='y' class='st3' d='M12.7,4.1c0.2,0.2,0.3,0.6,0.1,0.8l0,0L8.6,9.8C8.5,9.9,8.4,10,8.3,10c-0.2,0.1-0.5,0.1-0.7-0.1l0,0 L5.4,7.7c-0.2-0.2-0.2-0.6,0-0.8c0.2-0.2,0.6-0.2,0.8,0l0,0L8,8.6l3.8-4.5C12,3.9,12.4,3.9,12.7,4.1z'/%3e%3c/g%3e%3c/g%3e%3c/g%3e%3c/g%3e%3c/svg%3e)
Your Privacy Choices
