VSUB-1 Virtual Copper™️ 24 Bit Digital Audio Wireless Subwoofer System

The VSUB-1 Virtual Copper™️ Digital Wireless Subwoofer Audio System simplifies wiring your home theater system by allowing you to connect up to four subwoofers to your processor or AVR without the need for messy subwoofer interconnect cables. To use the VSUB-1 system, simply connect a VSUB-1T transmitter module to the sub output on your processor or AVR, and connect VSUB-1R receiver modules to each subwoofer you want to connect to it. Each VSUB-1T transmitter  can support up to four subwoofers at the same time, delivering the same high-quality audio signal to each via our proprietary wireless digital audio interconnect technology. 

The VSUB-1 system has a range of about fifty feet and, because each receiver is uniquely paired to a specific transmitter, you can use two transmitters if you have stereo subs. Once you pair each receiver with its transmitter, no other configuration is required, and your subwoofer acts as if it is simply connected to your processor or AVR with a cable. The VSUB-1 system is sold as a set, which includes one VSUB-1T transmitter and one VSUB-1R receiver, and additional receivers can be purchased separately if you wish to connect multiple subwoofers. 

The VSUB-1 system is optimized for use with subwoofers, so the system has a frequency response from 10 Hz to 2 kHz, and is not recommended for running full-range remote speakers.

• Separate audio component works with virtually any audio system. 

• Eliminates messy subwoofer audio cables.

• Connect up to four subwoofers to a single sub output on your processor or AVR.

• Proprietary wireless technology provides a reliable and stable audio connection.

• Unique pairing between receivers and transmitters allows you to use the VSUB-1 with stereo subwoofer configurations.

• Audio channels: 1

• Audio fan out: Each transmitter can simultaneously be paired with up to four receivers.

• Audio input (transmitter): Analog, unbalanced, maximum 2 VRMS.

• Audio output (receiver): Analog, unbalanced, maximum 2 VRMS.

• Frequency response: 10 Hz to 2 kHz +0/-2 dB.

• S/N ratio: 98 dB (@1 kHz, A weighted).

• THD: < 0.25% (1 kHz)

• Transmission method: Proprietary digital wireless protocol.

• Antenna: Internal.

• Range: Up to 50 feet (obstructions will reduce range).

• Power requirements: Each unit requires 5 VDC (universal voltage AC adapters included).

• Size: 4” wide x 4” deep x 1-1/4” tall.

VSUB-1 Manual