The Emotiva ET-3+ Trigger Sequencer is an essential device for enhancing the flexibility and control of your preamp or processor's trigger functionality. It enables you to manage up to three trigger-enabled devices from a single 12 VDC trigger output. Automatically activate all devices at once or sequentially at three-second intervals to reduce power draw.

Key Modes:

Trigger Mode:

• When a trigger signal is received by the ET-3+, the three Trigger Outputs will activate sequentially at three-second intervals, starting with Output #1. This prevents excessive power draw from activating multiple devices simultaneously.
• The Trigger Outputs will remain active as long as the ET-3+ continues to receive a trigger signal. When the trigger signal is removed, the Trigger Outputs will deactivate sequentially in reverse order, starting with Output #3, at three-second intervals.

On Mode:

• When AC power is applied to the ET-3+, the three Trigger Outputs will deliver a trigger signal sequentially at three-second intervals, starting with Output #1, to avoid excessive power draw.
• All Trigger Outputs will deactivate almost immediately when AC power is removed. If only one or two devices need to be activated, you can utilize a three- or six-second delay by using Output #2 or Output #3.

Comes with supplied universal 12 VDC AC power adapter.